Tire processing equipment at the end after a good enamel enamel pot reaction, due to the substrate surface quality is often not up to the technological requirements of Jiangsu enamel enamel pot reaction, such as a metal surface oxide layer remains, surface leather folder, weld defects and machining process Adhesion of grease and dirt, should affect the quality of Zibo enamel enameling reaction tank, it must be polished, burning oil decarbonization and sandblasting surface treatment. Polish general in the grinder or with a hand wheel. Enamel enamel reaction tank has three requirements: 1. to have good insulation glass-lined Liaoning enamel reaction tank, when the thickness of the glass-lined within the prescribed high frequency spark examination 20KV porcelain layer, high-frequency spark breakdown is not porcelain layers. 2. The internal stress of the glass layer is smaller, the better the elasticity, the greater the hardness, flexural compressive strength is higher, the impact resistance, the better. Glass layer within the specified thickness, with a diameter of 30mm, weight 112g ball at impact, the impact energy is 28210-3J. 3. Glass ceramic layer thickness 0.8-2.0mm, glass-lined equipment attachments porcelain thickness of 0.6-1.8 mm enamel reaction tank maintenance |. enamel reaction tank | Zibo Chemical Equipment Co. lining provided by Zibo Chemical Equipment Co. lining. Zibo Chemical Equipment Co. lining (www.zibogongtang.cn) strong, credible, Shandong Zibo glass industry equipment industry has accumulated a large number of loyal customers. The company better work attitude and constantly improving innovative ideas will lead lining Zibo Chemical Equipment Co., and you hand in hand into the brilliant, for a better future!